DryPatch Waterproof Repair Patch (4 Pack)

6,95 €

Waterproof Repair Patch for Bags and Outdoor Gear

Small tear or puncture in your waterproof gear? DryPatch lets you repair it quickly without glue, sewing or special tools. The self-adhesive waterproof repair patch is designed for TPU, PVC and PU-coated fabrics. The 4-pack includes two transparent and two black patches, so you can choose the one that best matches your gear.

Highlights

  • 4 patches: 2 transparent + 2 black
  • Waterproof patch with strong self-adhesive backing
  • For TPU, PVC and PU-coated fabrics
  • 5 × 5 cm patches that can be cut to size
  • Works on flat and curved surfaces
  • Suitable for waterproof bags, backpacks, inflatables, tents, jackets and other outdoor gear

In stock

Add to WishlistAdd to Compare
SKU: DTDRYPATCHTRSP Category: Brand:
REPAIR SMALL DAMAGE AND KEEP USING YOUR GEAR

A small tear or puncture does not always mean your waterproof gear needs replacing. DryPatch gives you a simple way to repair damaged fabric and keep using your gear.

The waterproof self-adhesive patch sticks directly to the fabric and seals the damaged area. It works on flat and curved surfaces and bends with the material, although it is not intended for extreme repeated folding directly over the patched area.

DryPatch can also be used on inflatables that do not stretch significantly when inflated, such as swimming floats and inflatable cushions. It is not intended for highly stretchable inflatable products such as balloons.

HOW TO REPAIR YOUR GEAR

1. CLEAN THE DAMAGED AREA
Clean the repair area thoroughly so there is no dirt, salt, grease or other residue on the fabric. Make sure the surface is dry before applying the patch.

2. CUT THE PATCH IF NEEDED
It is best to use the whole patch, but it can be cut to the required size. Make sure the patch overlaps the damaged area by at least 1 cm on all sides.

3. PRESS THE PATCH
Remove the backing and firmly press the patch over the puncture or tear, with the damaged area in the middle of the patch. Press the entire patch firmly onto the surface.

4. LET IT SET
Wait 4 hours before using the repaired gear. For best adhesion, apply the patch when the surface and surroundings are between 15 and 25°C.

TIP: For dry bags and waterproof backpacks, apply the patch to the inside of the bag where possible.

IMPORTANT: Patches can be applied over seams, but seams are uneven and the patch may not fully seal the area around the seam. For a waterproof repair, make sure the entire damaged area is covered.

For a full guide on repairing torn dry bags, check out our repair guide.

TECHNICAL SPECIFICATIONS
4
Patches per Pack
2 + 2
Transparent + Black
5 × 5 cm
Patch Size
TPU, PVC, PU
Compatible Fabrics
6 g
Pack Weight
4 Hours
Setting Time

Full technical specifications are available in the Specifications tab above.

FREQUENTLY ASKED QUESTIONS

What materials does DryPatch work with?

DryPatch is designed for TPU, PVC and PU-coated fabrics. It can be used on waterproof bags, backpacks, tents, jackets and other outdoor gear made from compatible fabrics.

Can I use DryPatch on curved surfaces?

Yes. The patch can be applied to both flat and curved surfaces. Avoid extreme repeated folding directly over the patched area.

Can I use DryPatch on an inflatable?

Yes, as long as the inflatable does not significantly stretch when inflated. It can be used on products such as swimming floats and inflatable cushions, but is not intended for highly stretchable products such as balloons.

Can I apply the patch over a seam?

Yes, but seams are uneven and the patch may not fully seal the area around the seam. Make sure the entire damaged area is covered.

How long should I wait before using the repaired gear?

Wait 4 hours after applying the patch. For best adhesion, apply it when the surface and surroundings are between 15 and 25°C.

Can I remove and reuse the patch?

No. DryPatch is intended for one-time use. Once applied, leave the patch in place.

Is the transparent patch completely invisible?

No. The transparent patch blends with the fabric and is less noticeable than a coloured patch, but it is not completely invisible.

COMPLETE YOUR SETUP

SPECIFICATIONS

GENERAL
Product Type
Self-adhesive waterproof fabric repair patch.
Pack Contents
4 patches: 2 transparent and 2 black.
Patch Size
5 × 5 cm.
Pack Weight
6 g, including packaging.
Package Dimensions
5.5 × 5.5 cm.
WATERPROOFING
Patch Waterproofing
Waterproof.
MATERIAL COMPATIBILITY
Compatible Fabrics
TPU, PVC and PU-coated fabrics.
Compatible Products
Waterproof bags, backpacks, inflatables that do not significantly stretch when inflated, tents, jackets and other outdoor gear made from compatible fabrics.
APPLICATION
Surface
Suitable for flat and curved surfaces.
Recommended Overlap
At least 1 cm on all sides of the damaged area.
Application Temperature
15–25°C for best adhesion.
Setting Time
4 hours before use.
Application Over Seams
Possible, but uneven seams may prevent the patch from fully sealing the area around the seam.
USE LIMITATIONS
Reusability
Single use. Leave the patch in place after application.
Extreme Folding
Avoid extreme repeated folding directly over the patched area.
Stretchable Inflatables
Not intended for highly stretchable inflatable products such as balloons.

 

There are no reviews yet.

Be the first to review “DryPatch Waterproof Repair Patch (4 Pack)”

Your email address will not be published. Required fields are marked *

YOU MAY ALSO LIKE